Logivyx Academy · PLC Programming

Learn PLC programming, from first rung to complete machine

A practical IEC 61131-3 course in ladder logic, Structured Text and Sequential Function Charts. Every lesson has a live simulator or drill, shows how the same thing is done on Siemens, Allen-Bradley and Mitsubishi PLCs, and ends with a lab you build and run on the Logivyx Soft-PLC.

8 levels · 30 modulesBasic levels freeAdvanced with Academy login

The Basic levels are open to everyone. The Advanced levels use the same Logivyx Academy login as the Logivyx product course; request access.

Read

Short lessons with diagrams, timing charts and worked examples.

Simulate

Live ladder simulators in the page: press buttons, watch power flow, see the timing.

Compare

Each instruction shown the IEC way and on Siemens TIA Portal, Rockwell Studio 5000 and Mitsubishi GX Works3.

Build

Labs on the Logivyx Soft-PLC: no hardware needed. Pass each check with 80 %.

Which PLC do you work with?

Pick one; every comparison in the course opens on it.

The course is written in IEC 61131-3 terms: TON, CTU, R_TRIG and so on. That is the language of the Logivyx Soft-PLC, CODESYS-based PLCs (Beckhoff, Schneider, WAGO and others), Omron Sysmac and Allen-Bradley Micro800, so what you learn transfers directly.

For S7-1200 and S7-1500 in TIA Portal: LAD, SCL and GRAPH. You will see the matching instructions (contacts, -(S)-/-(R)- coils, IEC timers with instance DBs, CTU/CTD) and %I/%Q/%M addressing, plus notes for S7-300/400 where they differ.

For ControlLogix and CompactLogix in Studio 5000 Logix Designer: XIC/XIO/OTE/OTL/OTU, TIMER and COUNTER tags with .PRE/.ACC/.DN, ONS/OSR, and tag-based addressing such as Local:1:I.Data.0.

For MELSEC iQ-R, iQ-F (FX5), Q and L in GX Works3: X/Y/M/D devices, LD/AND/OR/OUT/SET/RST, PLS/PLF and pulse contacts, T and C devices with K settings, and octal vs hexadecimal I/O numbering.

Basic modules are public. Advanced modules need a Logivyx Academy login. Your progress is saved in this browser; clearing site data or switching device starts it again. The Logivyx Soft-PLC runs on a general-purpose PC and is a training and machine-control tool, not a safety controller.