HARDWARE

Ready-to-run panels with the Logivyx Runtime pre-installed

Industrial panel PCs licensed and ready on first power-up, plus field I/O modules that wire your sensors and actuators to them over RS485. Each panel is the operator screen and the controller: the embedded Soft PLC runs on the panel, so no separate PLC is needed.

01

Panel PCs

Logivyx FieldCore 7 — 7-inch industrial panel with antennas, running a Logivyx P&ID screen
7″ · RASPBERRY PI CM4

FieldCore 7

₹37,500

The compact, field-ready controller-panel: wire it to 24 V and connect serial instruments directly.

  • 7″ 1024 × 600 capacitive touch, 400 cd/m²
  • 9–36 V DC terminal input, protected
  • 2 × RS232 + 2 × RS485 on terminals
  • Dual Ethernet (GbE + 100M), optional Wi-Fi and 4G
  • RTC, watchdog, EEPROM, crypto chip
Logivyx PanelCore 10 — 10.1-inch panel PC showing a multi-station Logivyx screen
10.1″ · RASPBERRY PI 5

PanelCore 10

₹45,000

A fanless 10.1-inch touch panel that is also the machine controller — unbox, mount and run.

  • 10.1″ 1280 × 800, 10-point capacitive touch
  • Quad-core Cortex-A76 at 2.4 GHz, 4 or 8 GB RAM
  • Gigabit Ethernet, Wi-Fi and Bluetooth
  • 2 × USB 3.0, 2 × USB 2.0, 2 × micro-HDMI
  • Optional 8 MP front camera (Vision variant)
Logivyx StationCore — 15/17-inch aluminium industrial panel PC showing a Logivyx AUTO screen
15″ · 17″ · INTEL CORE

StationCore 15 · 17

₹85,00015″ model · 17″ price on request

Big-screen SCADA and the Soft PLC on one fanless Windows operator station for a whole line.

  • 15″ 1024 × 768 or 17″ 1280 × 1024, PCAP touch, 450 nits
  • Intel Core i3 / i5 / i7, up to 32 GB RAM
  • 6 × COM (RS232 / RS485), 2 × Gigabit LAN
  • M.2 NVMe SSD + 2.5″ SATA bay
  • Windows 10 / 11, Wi-Fi / 4G expansion

Choose your panel

FieldCore 7PanelCore 10StationCore 15 · 17
DISPLAY7″ · 1024 × 60010.1″ · 1280 × 80015″ 1024 × 768 · 17″ 1280 × 1024
PROCESSORRaspberry Pi CM4, 4 × A72 1.5 GHzRaspberry Pi 5, 4 × A76 2.4 GHzIntel Core i3 / i5 / i7 (7th gen)
OPERATING SYSTEMLinux ARM64Linux ARM64Windows 10 / 11
POWER9–36 V DC terminal5 V / 5 A USB-C12 V DC (9–36 V optional)
SERIAL PORTS2 × RS232 · 2 × RS485— (USB adapter)6 × COM (COM1/2 RS232 or RS485)
ETHERNET1 × GbE + 1 × 100M1 × GbE2 × GbE
WIRELESSWi-Fi / BT, 4G (optional)Wi-Fi · BluetoothWi-Fi / BT, 4G (optional)
PRICE₹37,500₹45,00015″ ₹85,000 · 17″ on request
BEST FORCompact machines, serial devices, remote sitesSingle machines, HMI + Soft PLCMulti-station lines, line SCADA

All three run the same .hmi project file from Logivyx Studio. Full specifications, dimensions and order codes are in each product catalog.

02

Field IOs

Logivyx FieldIO 8DI/8DO — DIN-rail RS485 Modbus RTU digital I/O module with input and output status LEDs
DIN RAIL · RS485 · MODBUS RTU

FieldIO 8DI / 8DO

₹2,950

An isolated 8-input / 8-output module that brings push-buttons, sensors, valves and lamps onto your Logivyx panel over a single RS485 cable — read and driven directly by the Soft PLC with the built-in Modbus RTU driver.

  • 8 digital inputs, 5–36 V DC — dry contact, NPN or PNP
  • 8 digital outputs, 5–40 V DC open-drain, 500 mA per channel
  • Bidirectional optocoupler inputs; isolated power, self-resetting fuses and TVS protection
  • RS485, standard Modbus RTU; 4800–256000 baud, default 9600 8N1
  • Address 1–255 — chain many modules on one RS485 line
  • Power 7–36 V DC · DIN-rail housing 72 × 121 × 34 mm
OUTPUT CONTROL MODES
Normal — outputs follow Soft PLC / HMI commands
Linkage — each output mirrors its input
Toggle — an input pulse flips the output
Edge trigger — output changes on every input edge
CONNECTS TO
FieldCore 7 — on-board RS485 — wire straight to the terminals
StationCore 15 · 17 — COM1 / COM2 set to RS485
PanelCore 10 — through a USB–RS485 adapter
Logivyx FieldIO 8AI — DIN-rail RS485 Modbus RTU 8-channel analog input module for voltage and 4–20 mA signals
ANALOG INPUT · 12-BIT · MODBUS RTU

FieldIO 8AI

₹3,450

An isolated 8-channel analog input module for pressure, level, temperature and flow transmitters. Each channel is set to its own voltage or current range, and the Soft PLC reads engineering values in mV or µA directly over Modbus RTU.

  • 8 analog inputs, 12-bit, single-ended or differential
  • Per-channel range: 0–20 mA, 4–20 mA, or voltage (0–5 / 1–5 V or 0–10 / 2–10 V by version)
  • Values in mV or µA — no scaling maths; raw 0–4095 mode also available
  • Power and signal isolation, resettable fuse, TVS and ESD protection
  • RS485, standard Modbus RTU; address 1–255, default 9600 8N1
  • Power 7–36 V DC · DIN-rail housing 72 × 121 × 34 mm
TWO VERSIONS
8AI-C — 0–5 V, 1–5 V, 0–20 mA, 4–20 mA; ships in current mode
8AI-V — 0–10 V, 2–10 V, 0–20 mA, 4–20 mA; ships in voltage mode
Voltage or current is set per channel with an internal jumper.
CONNECTS TO
FieldCore 7 — on-board RS485 — wire straight to the terminals
StationCore 15 · 17 — COM1 / COM2 set to RS485
PanelCore 10 — through a USB–RS485 adapter
Logivyx FieldIO 8RO-ETH — DIN-rail Ethernet relay module with 8 relays, 8 digital inputs and PoE
ETHERNET · PoE · MODBUS TCP

FieldIO 8RO-ETH

₹7,450

Eight 10 A relays and eight digital inputs on the plant Ethernet network. Power it over PoE, plug it into any switch, and every Logivyx panel — including PanelCore 10, with no adapter — switches pumps, heaters, motors and valves through the Modbus TCP driver.

  • 8 relays, changeover (1 NO + 1 NC), 10 A 250 V AC / 30 V DC
  • 8 digital inputs, 5–36 V DC — dry contact, NPN or PNP, optocoupled
  • Ethernet with PoE (IEEE 802.3af); Modbus TCP or Modbus RTU over TCP
  • Power by PoE, DC jack or 7–36 V DC terminal
  • Optocoupler isolation, flyback diodes and reverse-polarity protection
  • DIN-rail housing 175 × 90 × 40 mm
RELAY CONTROL MODES
Normal — relays follow Soft PLC / HMI commands
Linkage — each relay mirrors its input
Toggle — an input pulse flips the relay
Edge trigger — relay changes on every input edge
CONNECTS TO
Every Logivyx panel — over the Ethernet network, Modbus TCP port 502
PoE switch — one cable for data and power
Other systems — any Modbus TCP master or SCADA
Logivyx FieldIO 1616-EIP — compact EtherNet/IP digital I/O module with 16 inputs and 16 configurable input/output channels
ETHERNET/IP · 24 V PNP · IP20

FieldIO 1616-EIP

₹16,650

A compact, high-density EtherNet/IP I/O block: 16 PNP inputs plus 16 channels you configure as inputs or outputs — up to 32 inputs or 16 outputs in a 120 mm wide module. The Logivyx Runtime reads and drives it as EtherNet/IP remote I/O, using the module's EDS file.

  • 16 digital inputs + 16 configurable input / output channels, PNP, 24 V DC
  • Outputs 0.5 A per channel (4 A per module) for resistive, inductive and lamp loads
  • 3-wire terminals per channel (signal, 24 V, 0 V) — sensors wire without extra terminals
  • EtherNet/IP, 10/100 Mbit/s, two RJ45 ports (X1, X2)
  • IEC 61000-4 EFT, ESD and surge level A; 4 g vibration, 15 g shock; −5 to +60 °C
  • IP20, DIN rail, 120 × 70 × 37.9 mm, 240 g · CE
I/O AT A GLANCE
Inputs — "1" at 18–30 V, "0" at 0–5 V, ~4 mA; adjustable filter
Outputs — up to 1 kHz resistive, 10 Hz lamps, 1 Hz inductive
Diagnostics — LEDs plus fault messages over the network
CONNECTS TO
Every Logivyx panel — EtherNet/IP remote I/O over the panel's LAN port
Logivyx Studio — add the module from its EDS file
Other systems — any EtherNet/IP scanner or PLC

One engineering tool. One runtime. No separate PLC.

Logivyx combines a full HMI/SCADA designer with an embedded Soft PLC. Two products, one project file: Logivyx Studio for engineering and Logivyx Runtime for the deployed operator station.

MODULE A

HMI & Visualisation

A desktop-class designer for operator screens, with the data, security and reporting an industrial HMI is expected to have — ready out of the box.

Screen Designer

Multi-screen canvas with shared zone grid, auto display sizing, Master Template overlay, Z-order, alignment and copy/paste.

Widget Library

Gauges, trends, dual-axis and X-Y charts, grid views, switches, sliders, multi-state lamps — every widget tag-bound.

Process & P&ID Graphics

Animated tanks, valves, motors/pumps, pipes with flow, conveyors and pistons, plus connectable P&ID symbols.

Alarm Management

Alarm banner on every screen, alarm list dialog, and an auto-alarm generator built from the tag list.

Data Logging & Recipes

Trigger-based logging to SQLite with unique batch keys and CSV export; multiple recipe profiles with an operator recipe widget.

Reports

Print-ready A4 / Letter layouts; auto-export to PDF on a trigger tag, one file per batch.

Security & Users

User groups, hashed passwords, login-gated Run mode and audit-friendly current-user tags.

Vision, Twin & Remote View

USB camera widget with vision processing, Digital Twin visualisation, and a browser / Android web viewer.

MODULE B

Logic & Embedded Soft PLC

The control layer that replaces a separate PLC. Program in the IEC 61131-3 style your engineers already know, and run it in the same runtime as the HMI.

ST

Structured Text

Full editor with function palette, user UDTs and Function Blocks.

Logivyx Structured Text editor with syntax-highlighted fill-control routine
LAD

Ladder Diagram

Graphical rung editor with contacts, coils and FB boxes; generates ST.

Logivyx Ladder editor showing rungs of a leak-test machine
SEQ

Sequence Designer

Step / transition flow with live step highlighting and Excel import.

Logivyx Sequence Designer showing auto-cycle steps, transitions and alarm branches
(* Fill control *)
fillTmr(IN := Start, PT := T#5s);
IF Level < SP AND NOT Fault THEN
  Valve_Open := TRUE;
ELSE
  Valve_Open := FALSE;
END_IF;
Out := SCALE(Raw, 0, 27648);

Soft PLC Runtime Engine

Cyclic scan: input refresh, execution, output write-back. Scan-time and overrun monitoring, fault isolation per scan, retentive variables across restarts.

Standard Function Library

TON, TOF, TP, CTU, CTD, edge triggers, PID, SCALE/LIMIT, maths, trig, strings and type conversions.

Motion Control

PLCopen-style blocks for CiA 402 drives: MC_Power, MC_Home, MC_MoveAbsolute / Relative / Velocity, MC_Stop, MC_Reset.

Code Generators

I/O mapping, analog scaling, alarm logic, recipes and settings screens from tag lists and Excel sheets.

Diagnosis & Cross-Reference

Online logic and I/O diagnosis, watch window with forcing, project-wide tag cross-reference.

PLC Interoperability

Export to Rockwell Studio 5000 (L5X) and Siemens TIA Portal (SCL); import Logix L5X projects.

NO-CODE TOOLS AT EVERY STEP

Configure forms. Draw diagrams. Import spreadsheets.

Drag & drop screens

Build screens from a palette; bind tags by picking from the browser.

Excel tag & I/O import

Tags, I/O lists and sequences from Excel, L5X or PLC exports in one click.

Form-based data services

Logging, recipes, reports, SQL and alarms through dialogs — no scripting.

Point-and-click behaviour

Data transfers, popups, navigation, visibility and security per widget.

AI-assisted engineering

A built-in assistant helps draft logic and screens.

Built-in simulator

Test screens and logic together before any hardware arrives.

Want the full spec sheet?

View specifications Book a visit